diff --git a/build/doctrees/CODARprocessing.doctree b/build/doctrees/CODARprocessing.doctree new file mode 100644 index 0000000..0ce0564 Binary files /dev/null and b/build/doctrees/CODARprocessing.doctree differ diff --git a/build/doctrees/WERAprocessing.doctree b/build/doctrees/WERAprocessing.doctree new file mode 100644 index 0000000..ffa5929 Binary files /dev/null and b/build/doctrees/WERAprocessing.doctree differ diff --git a/build/doctrees/environment.pickle b/build/doctrees/environment.pickle index 83e6d8e..21b3646 100644 Binary files a/build/doctrees/environment.pickle and b/build/doctrees/environment.pickle differ diff --git a/build/doctrees/index.doctree b/build/doctrees/index.doctree index 6e49b6f..589787f 100644 Binary files a/build/doctrees/index.doctree and b/build/doctrees/index.doctree differ diff --git a/build/html/CODARprocessing.html b/build/html/CODARprocessing.html new file mode 100644 index 0000000..dd3fe29 --- /dev/null +++ b/build/html/CODARprocessing.html @@ -0,0 +1,284 @@ + + + + + + + + CODAR post-processing — documentation_HFR_analysis 0.0.1 documentation + + + + + + + + + + + + + + + +
+
+
+
+ +

You have to loggin to the CODAR server at UQAR.

+

Then follow the directions:

+

== Check processed data == +Go to

+

‘’‘CodarData/Codar/SeaSonde/Data/Spectra/SpectraProcessed’‘’

+
    +
  • check that all files have been processed
  • +
  • If ok, remove all file (move to trash)
  • +
+

== RadialConfig == +Go to

+

‘’‘CodarData/Codar/SeaSonde/Configs/RadialConfigs’‘’

+
    +
  • Delete everything
  • +
+

Go to (for example)

+

‘’‘CodarData/Codar/SeaSonde/Configs/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_nosmooth’‘’

+
    +
  • Copy the content of the folder into
  • +
+

‘’‘CodarData/Codar/SeaSonde/Configs/RadialConfigs’‘’

+
+

CODAR post-processing

+

== Antenna diagrams for processing ==

+

Go to

+

‘’‘CodarData/Codar/SeaSonde/Data/Loops/ PATT_PAP1_2014_01_14_1154_NoSmooth.xlp’‘’

+

Copy MeasPattern.txt and Phases.txt

+

Paste in +‘’‘CodarData/Codar/SeaSonde/Configs/RadialConfigs’‘’

+

Open Header.txt and change line 19 if needed

+

save. (MUSIC parameters 40 20 2 or 80 40 1)

+

==’‘’ADD-ON Analysis on March 14, 2014’‘’==

+

Go to

+

‘’‘CodarData/Codar/SeaSonde/Configs/RadialConfigs’‘’

+

Run “Seasonde Radial Site Setup”.

+

In “Advanced”, uncheck “filtered and filled” and check “filtered” only.

+

Save.

+

Copy the content of the folder RadialConfigs back to the original folder, for example if what is in the “/RadialConfigs” folder comes from “/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_20Dsmooth”, after running the “Seasonde Radial Site Setup”, copy the content of “/RadialConfigs” back to “/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_20Dsmooth”.

+

== Spectra ==

+

Go get spectra on disks (CODAR1 or CODAR2) (on desktop)

+

Go to (for example)

+

‘’‘Codar2/PAP1/Archives/Spectra/’‘’

+

Copy the day(s) we are interested in

+

(Attention: copy the CSS_....cs4 files in PAP1_CSS_... folder!!) +and paste in

+

‘’‘CodarData/Codar/SeaSonde/Data/Spectra/SpectraToProcess’‘’

+

==> Can also store spectra in

+

CodarData/Codar/SeaSonde/Data/Spectra/SpectraSeries

+

Before copy/paste in SpectraToProcess

+

Once the spectra are in SpectraToProcess, the analysis starts automatically!

+

ATTENTION: make sure all the files are copied in “SpectraToProcess” sometimes copy-paste does miss files….

+

== Retrieve processed data ==

+

Go to

+

‘’‘CodarData/Codar/SeaSonde/Data/Radials/’‘’

+

Processed data are in “Filtered”, “IdealPattern” and “MeasPattern” folders.

+

Save data in appropriate folders (to be created if needs be)

+

MUSIC 40-20-2 +*no smoothing +*measured no filtered +*ideal no filtered +*measured filtered +*ideal filtered

+

MUSIC 80-40-1 +*no smoothing +*measured no filtered +*ideal no filtered +*measured filtered +*ideal filtered

+

MUSIC 40-20-2 +*20D smoothing +*measured no filtered +*measured filtered

+

MUSIC 80-40-1 +*20D smoothing +*measured no filtered +*measured filtered

+

== Transfer data to local disk ==

+

== Transform .ruv to .mat ==

+

Using radial2uv.m

+

Be careful to the flag f.

+

*f=0 for not filtered data; +*f=1 for filtered data

+

== CHECK_UP ==

+

{| +| +| +| +| +|PAP +|STF +|- +|1. measured +|MUSIC 40-20-2 +|no smoothing +|no filtered +|ok +|ok +|- +|2. ideal +|MUSIC 40-20-2 +|no smoothing +|no filtered +|ok +|ok +|- +|3. measured +|MUSIC 40-20-2 +|no smoothing +|filtered +|ok +|ok +|- +|4. ideal +|MUSIC 40-20-2 +|no smoothing +|filtered +|ok +|ok +|- +|5. measured +|MUSIC 80-40-1 +|no smoothing +|no filtered +|ok +|ok +|- +|6. ideal +|MUSIC 80-40-1 +|no smoothing +|no filtered +|ok +|ok +|- +|7. measured +|MUSIC 80-40-1 +|no smoothing +|filtered +|ok +|ok +|- +|8. ideal +|MUSIC 80-40-1 +|no smoothing +|filtered +|ok +|ok +|- +|9. measured +|MUSIC 40-20-2 +|20D smoothing +|no filtered +|ok +|ok +|- +|10. measured +|MUSIC 40-20-2 +|20D smoothing +|filtered +|ok +|ok +|- +|11. measured +|MUSIC 80-40-1 +|20D smoothing +|no filtered +|ok +|ok +|- +|12. measured +|MUSIC 80-40-1 +|20D smoothing +|filtered +|ok +|ok +|}

+

Modified by Marion Bandet on 2015/07/14

+
+ + +
+
+
+
+
+

Previous topic

+

Welcome to the documentation of High Frequency Radars (CODAR and WERA)

+

Next topic

+

WERA POST=PROCESSING

+

This Page

+ + + +
+
+
+
+ + + + \ No newline at end of file diff --git a/build/html/WERAprocessing.html b/build/html/WERAprocessing.html new file mode 100644 index 0000000..a4c8764 --- /dev/null +++ b/build/html/WERAprocessing.html @@ -0,0 +1,118 @@ + + + + + + + + WERA POST=PROCESSING — documentation_HFR_analysis 0.0.1 documentation + + + + + + + + + + + + + + + +
+
+
+
+ +
+

WERA POST=PROCESSING

+

Post-processing of WERA radial currents is much simpler than for the CODAR system.

+

The WERA system outputs data in folders identified by the year and Julian day (for example 2014101 for April 11, 2014).

+

In each folder we find .RFI and .SORT files for every hour (should find 24 files of each extention per day).

+

Use the shell script do_process_SORT_pol to generate .crad_pol_lst files. They will be found in the subfolder YYYYJJJ/results/.

+

**** Use radiallst2uv.m to convert lst 2 mat files (To be verified).****

+

To download radial currents from the sites:

+

rsync -v -e ssh wera@wera-lsle-pao.dyndns.org:/home/wera/data/ftp_transfer/${DATE}${HEURE}*_ascii* .

+

with i.e DATE=2015121 (yyyyJJJ) and HEURE =0100

+
+ + +
+
+
+
+
+

Previous topic

+

CODAR post-processing

+

Next topic

+

Current combination

+

This Page

+ + + +
+
+
+
+ + + + \ No newline at end of file diff --git a/build/html/_sources/CODARprocessing.txt b/build/html/_sources/CODARprocessing.txt new file mode 100644 index 0000000..7160eda --- /dev/null +++ b/build/html/_sources/CODARprocessing.txt @@ -0,0 +1,247 @@ +You have to loggin to the CODAR server at UQAR. + +Then follow the directions: + + +== Check processed data == +Go to + +'''CodarData/Codar/SeaSonde/Data/Spectra/SpectraProcessed''' + +* check that all files have been processed +* If ok, remove all file (move to trash) + + + +== RadialConfig == +Go to + +'''CodarData/Codar/SeaSonde/Configs/RadialConfigs''' + +* Delete everything + +Go to (for example) + +'''CodarData/Codar/SeaSonde/Configs/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_nosmooth''' + +* Copy the content of the folder into + +'''CodarData/Codar/SeaSonde/Configs/RadialConfigs''' + +CODAR post-processing +===================== + +== Antenna diagrams for processing == + +Go to + +'''CodarData/Codar/SeaSonde/Data/Loops/ PATT_PAP1_2014_01_14_1154_NoSmooth.xlp''' + +Copy MeasPattern.txt and Phases.txt + +Paste in +'''CodarData/Codar/SeaSonde/Configs/RadialConfigs''' + +Open Header.txt and change line 19 if needed + +save. (MUSIC parameters 40 20 2 or 80 40 1) + + +=='''ADD-ON Analysis on March 14, 2014'''== + +Go to + +'''CodarData/Codar/SeaSonde/Configs/RadialConfigs''' + +Run “Seasonde Radial Site Setup”. + +In “Advanced”, uncheck “filtered and filled” and check “filtered” only. + +Save. + +Copy the content of the folder RadialConfigs back to the original folder, for example if what is in the “/RadialConfigs” folder comes from “/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_20Dsmooth”, after running the “Seasonde Radial Site Setup”, copy the content of “/RadialConfigs” back to “/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_20Dsmooth”. + + + + + +== Spectra == + +Go get spectra on disks (CODAR1 or CODAR2) (on desktop) + +Go to (for example) + +'''Codar2/PAP1/Archives/Spectra/''' + +Copy the day(s) we are interested in + +(Attention: copy the CSS_....cs4 files in PAP1_CSS_... folder!!) +and paste in + +'''CodarData/Codar/SeaSonde/Data/Spectra/SpectraToProcess''' + +==> Can also store spectra in + +CodarData/Codar/SeaSonde/Data/Spectra/SpectraSeries + +Before copy/paste in SpectraToProcess + +Once the spectra are in SpectraToProcess, the analysis starts automatically! + +ATTENTION: make sure all the files are copied in “SpectraToProcess” sometimes copy-paste does miss files…. + + +== Retrieve processed data == + +Go to + +'''CodarData/Codar/SeaSonde/Data/Radials/''' + +Processed data are in “Filtered”, “IdealPattern” and “MeasPattern” folders. + +Save data in appropriate folders (to be created if needs be) + + +MUSIC 40-20-2 +*no smoothing +*measured no filtered +*ideal no filtered +*measured filtered +*ideal filtered + + +MUSIC 80-40-1 +*no smoothing +*measured no filtered +*ideal no filtered +*measured filtered +*ideal filtered + + +MUSIC 40-20-2 +*20D smoothing +*measured no filtered +*measured filtered + + +MUSIC 80-40-1 +*20D smoothing +*measured no filtered +*measured filtered + + + +== Transfer data to local disk == + + + +== Transform .ruv to .mat == + +Using radial2uv.m + +Be careful to the flag f. + +*f=0 for not filtered data; +*f=1 for filtered data + + + + +== CHECK_UP == + +{| +| +| +| +| +|PAP +|STF +|- +|1. measured +|MUSIC 40-20-2 +|no smoothing +|no filtered +|ok +|ok +|- +|2. ideal +|MUSIC 40-20-2 +|no smoothing +|no filtered +|ok +|ok +|- +|3. measured +|MUSIC 40-20-2 +|no smoothing +|filtered +|ok +|ok +|- +|4. ideal +|MUSIC 40-20-2 +|no smoothing +|filtered +|ok +|ok +|- +|5. measured +|MUSIC 80-40-1 +|no smoothing +|no filtered +|ok +|ok +|- +|6. ideal +|MUSIC 80-40-1 +|no smoothing +|no filtered +|ok +|ok +|- +|7. measured +|MUSIC 80-40-1 +|no smoothing +|filtered +|ok +|ok +|- +|8. ideal +|MUSIC 80-40-1 +|no smoothing +|filtered +|ok +|ok +|- +|9. measured +|MUSIC 40-20-2 +|20D smoothing +|no filtered +|ok +|ok +|- +|10. measured +|MUSIC 40-20-2 +|20D smoothing +|filtered +|ok +|ok +|- +|11. measured +|MUSIC 80-40-1 +|20D smoothing +|no filtered +|ok +|ok +|- +|12. measured +|MUSIC 80-40-1 +|20D smoothing +|filtered +|ok +|ok +|} + + +Modified by Marion Bandet on 2015/07/14 + diff --git a/build/html/_sources/WERAprocessing.txt b/build/html/_sources/WERAprocessing.txt new file mode 100644 index 0000000..0833817 --- /dev/null +++ b/build/html/_sources/WERAprocessing.txt @@ -0,0 +1,20 @@ +WERA POST=PROCESSING +==================== + +Post-processing of WERA radial currents is much simpler than for the CODAR system. + +The WERA system outputs data in folders identified by the year and Julian day (for example 2014101 for April 11, 2014). + +In each folder we find .RFI and .SORT files for every hour (should find 24 files of each extention per day). + +Use the shell script do_process_SORT_pol to generate .crad_pol_lst files. They will be found in the subfolder YYYYJJJ/results/. + +**** Use radiallst2uv.m to convert lst 2 mat files (To be verified).**** + + +To download radial currents from the sites: + +rsync -v -e ssh wera@wera-lsle-pao.dyndns.org:/home/wera/data/ftp_transfer/${DATE}${HEURE}*_ascii* . + +with i.e DATE=2015121 (yyyyJJJ) and HEURE =0100 + diff --git a/build/html/_sources/index.txt b/build/html/_sources/index.txt index e02798a..1f07206 100644 --- a/build/html/_sources/index.txt +++ b/build/html/_sources/index.txt @@ -17,8 +17,8 @@ The main documentation for the site is organized into a couple sections: .. toctree:: :maxdepth: 2 - CODAR_processing - WERA_processing + CODARprocessing + WERAprocessing CurrentsCombination OGSL diff --git a/build/html/index.html b/build/html/index.html index 1c39589..2f1613c 100644 --- a/build/html/index.html +++ b/build/html/index.html @@ -24,7 +24,7 @@ - +