CODARprocessing.rst 4.28 KB

You have to loggin to the CODAR server at UQAR.

Then follow the directions:

== Check processed data == Go to

'''CodarData/Codar/SeaSonde/Data/Spectra/SpectraProcessed'''

  • check that all files have been processed
  • If ok, remove all file (move to trash)

== RadialConfig == Go to

'''CodarData/Codar/SeaSonde/Configs/RadialConfigs'''

  • Delete everything

Go to (for example)

'''CodarData/Codar/SeaSonde/Configs/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_nosmooth'''

  • Copy the content of the folder into

'''CodarData/Codar/SeaSonde/Configs/RadialConfigs'''

CODAR post-processing

== Antenna diagrams for processing ==

Go to

'''CodarData/Codar/SeaSonde/Data/Loops/ PATT_PAP1_2014_01_14_1154_NoSmooth.xlp'''

Copy MeasPattern.txt and Phases.txt

Paste in '''CodarData/Codar/SeaSonde/Configs/RadialConfigs'''

Open Header.txt and change line 19 if needed

save. (MUSIC parameters 40 20 2 or 80 40 1)

=='''ADD-ON Analysis on March 14, 2014'''==

Go to

'''CodarData/Codar/SeaSonde/Configs/RadialConfigs'''

Run “Seasonde Radial Site Setup”.

In “Advanced”, uncheck “filtered and filled” and check “filtered” only.

Save.

Copy the content of the folder RadialConfigs back to the original folder, for example if what is in the “/RadialConfigs” folder comes from “/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_20Dsmooth”, after running the “Seasonde Radial Site Setup”, copy the content of “/RadialConfigs” back to “/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_20Dsmooth”.

== Spectra ==

Go get spectra on disks (CODAR1 or CODAR2) (on desktop)

Go to (for example)

'''Codar2/PAP1/Archives/Spectra/'''

Copy the day(s) we are interested in

(Attention: copy the CSS_....cs4 files in PAP1_CSS_... folder!!) and paste in

'''CodarData/Codar/SeaSonde/Data/Spectra/SpectraToProcess'''

==> Can also store spectra in

CodarData/Codar/SeaSonde/Data/Spectra/SpectraSeries

Before copy/paste in SpectraToProcess

Once the spectra are in SpectraToProcess, the analysis starts automatically!

ATTENTION: make sure all the files are copied in “SpectraToProcess” sometimes copy-paste does miss files….

== Retrieve processed data ==

Go to

'''CodarData/Codar/SeaSonde/Data/Radials/'''

Processed data are in “Filtered”, “IdealPattern” and “MeasPattern” folders.

Save data in appropriate folders (to be created if needs be)

MUSIC 40-20-2 *no smoothing *measured no filtered *ideal no filtered *measured filtered *ideal filtered

MUSIC 80-40-1 *no smoothing *measured no filtered *ideal no filtered *measured filtered *ideal filtered

MUSIC 40-20-2 *20D smoothing *measured no filtered *measured filtered

MUSIC 80-40-1 *20D smoothing *measured no filtered *measured filtered

== Transfer data to local disk ==

== Transform .ruv to .mat ==

Using radial2uv.m

Be careful to the flag f.

*f=0 for not filtered data; *f=1 for filtered data

== CHECK_UP ==

{| | | | | |PAP |STF |- |1. measured |MUSIC 40-20-2 |no smoothing |no filtered |ok |ok |- |2. ideal |MUSIC 40-20-2 |no smoothing |no filtered |ok |ok |- |3. measured |MUSIC 40-20-2 |no smoothing |filtered |ok |ok |- |4. ideal |MUSIC 40-20-2 |no smoothing |filtered |ok |ok |- |5. measured |MUSIC 80-40-1 |no smoothing |no filtered |ok |ok |- |6. ideal |MUSIC 80-40-1 |no smoothing |no filtered |ok |ok |- |7. measured |MUSIC 80-40-1 |no smoothing |filtered |ok |ok |- |8. ideal |MUSIC 80-40-1 |no smoothing |filtered |ok |ok |- |9. measured |MUSIC 40-20-2 |20D smoothing |no filtered |ok |ok |- |10. measured |MUSIC 40-20-2 |20D smoothing |filtered |ok |ok |- |11. measured |MUSIC 80-40-1 |20D smoothing |no filtered |ok |ok |- |12. measured |MUSIC 80-40-1 |20D smoothing |filtered |ok |ok |}

Modified by Marion Bandet on 2015/07/14