Commit bcbba8cb authored by Marion Bandet's avatar Marion Bandet
Browse files

update

parent 27ca2924
This diff is collapsed.
You have to loggin to the CODAR server at UQAR.
CODAR radial currents processing
==================================
You have to loggin to the CODAR server at UQAR.
Then follow the directions:
1. Check processed data
== Check processed data ==
Go to
'''CodarData/Codar/SeaSonde/Data/Spectra/SpectraProcessed'''
* check that all files have been processed
* If ok, remove all file (move to trash)
Go to **/Volumes/CodarData/Codar/SeaSonde/Data/Spectra/SpectraProcessed/**
- check that all files have been processed
- If ok, remove all file (move to trash)
== RadialConfig ==
Go to
2. RadialConfig
'''CodarData/Codar/SeaSonde/Configs/RadialConfigs'''
Go to **/Volumes/CodarData/Codar/SeaSonde/Configs/RadialConfigs/**
* Delete everything
- Delete everything
Go to (for example)
'''CodarData/Codar/SeaSonde/Configs/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_nosmooth'''
Go to (for example) **/Volumes/CodarData/Codar/SeaSonde/Configs/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_nosmooth/**
* Copy the content of the folder into
- Copy the content of the folder into **/Volumes/CodarData/Codar/SeaSonde/Configs/RadialConfigs/**
'''CodarData/Codar/SeaSonde/Configs/RadialConfigs'''
CODAR post-processing
=====================
== Antenna diagrams for processing ==
3. Antenna diagrams for processing
Go to
Go to **/Volumes/CodarData/Codar/SeaSonde/Data/Loops/PATT_PAP1_2014_01_14_1154_NoSmooth.xlp**
'''CodarData/Codar/SeaSonde/Data/Loops/ PATT_PAP1_2014_01_14_1154_NoSmooth.xlp'''
- Copy MeasPattern.txt and Phases.txt
Copy MeasPattern.txt and Phases.txt
- Paste in **/Volumes/CodarData/Codar/SeaSonde/Configs/RadialConfigs/**
Paste in
'''CodarData/Codar/SeaSonde/Configs/RadialConfigs'''
- Open Header.txt and change line 19 if needed
Open Header.txt and change line 19 if needed
- save (MUSIC parameters 40 20 2 or 80 40 1)
save. (MUSIC parameters 40 20 2 or 80 40 1)
**ADD-ON Analysis on March 14, 2014**
=='''ADD-ON Analysis on March 14, 2014'''==
+ Go to **/Volumes/CodarData/Codar/SeaSonde/Configs/RadialConfigs/**
Go to
+ Run “Seasonde Radial Site Setup”.
'''CodarData/Codar/SeaSonde/Configs/RadialConfigs'''
In “Advanced”, uncheck “filtered and filled” and check “filtered” only.
Run “Seasonde Radial Site Setup”.
In “Advanced”, uncheck “filtered and filled” and check “filtered” only.
Save.
+ Save.
Copy the content of the folder RadialConfigs back to the original folder, for example if what is in the “/RadialConfigs” folder comes from “/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_20Dsmooth”, after running the “Seasonde Radial Site Setup”, copy the content of “/RadialConfigs” back to “/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_20Dsmooth”.
4. Spectra
== Spectra ==
Go get spectra on disks (CODAR1 or CODAR2) (on desktop)
Go to (for example)
+ Go get spectra on disks (CODAR1 or CODAR2) (on desktop)
'''Codar2/PAP1/Archives/Spectra/'''
+ Go to (for example) **/Volumes/Codar2/PAP1/Archives/Spectra/**
Copy the day(s) we are interested in
+ Copy the day(s) we are interested in
(Attention: copy the CSS_....cs4 files in PAP1_CSS_... folder!!)
and paste in **/Volumes/CodarData/Codar/SeaSonde/Data/Spectra/SpectraToProcess/**
(Attention: copy the CSS_....cs4 files in PAP1_CSS_... folder!!)
and paste in
==> Can also store spectra in **/Volumes/CodarData/Codar/SeaSonde/Data/Spectra/SpectraSeries**
before copy/paste in **SpectraToProcess**
'''CodarData/Codar/SeaSonde/Data/Spectra/SpectraToProcess'''
==> Can also store spectra in
CodarData/Codar/SeaSonde/Data/Spectra/SpectraSeries
Before copy/paste in SpectraToProcess
Once the spectra are in SpectraToProcess, the analysis starts automatically!
+ Once the spectra are in SpectraToProcess, the analysis starts automatically!
ATTENTION: make sure all the files are copied in “SpectraToProcess” sometimes copy-paste does miss files….
== Retrieve processed data ==
5. Retrieve processed data
Go to
'''CodarData/Codar/SeaSonde/Data/Radials/'''
+ Go to **/Volumes/CodarData/Codar/SeaSonde/Data/Radials/**
Processed data are in “Filtered”, “IdealPattern” and “MeasPattern” folders.
Save data in appropriate folders (to be created if needs be)
+ Save data in appropriate folders (to be created if needs be)
MUSIC 40-20-2
*no smoothing
*measured no filtered
*ideal no filtered
*measured filtered
*ideal filtered
* no smoothing
* measured no filtered
* ideal no filtered
* measured filtered
* ideal filtered
MUSIC 80-40-1
*no smoothing
*measured no filtered
*ideal no filtered
*measured filtered
*ideal filtered
* no smoothing
* measured no filtered
* ideal no filtered
* measured filtered
* ideal filtered
MUSIC 40-20-2
*20D smoothing
*measured no filtered
*measured filtered
* 20D smoothing
* measured no filtered
* measured filtered
MUSIC 80-40-1
*20D smoothing
*measured no filtered
*measured filtered
* 20D smoothing
* measured no filtered
* measured filtered
6. Transfer data to local disk
== Transfer data to local disk ==
7. Transform .ruv to .mat
Using radial2uv.m. Be careful to the flag f.
== Transform .ruv to .mat ==
* f=0 for not filtered data;
* f=1 for filtered data
Using radial2uv.m
Be careful to the flag f.
*f=0 for not filtered data;
*f=1 for filtered data
CHECK-UP
==========
+------------------------+------------+----------+----------+
| Header row, column 1 | Header 2 | Header 3 | Header 4 |
| (header rows optional) | | | |
+========================+============+==========+==========+
| body row 1, column 1 | column 2 | column 3 | column 4 |
+------------------------+------------+----------+----------+
| body row 2 | Cells may span columns. |
+------------------------+------------+---------------------+
| body row 3 | Cells may | - Table cells |
+------------------------+ span rows. | - contain |
| body row 4 | | - body elements. |
+------------------------+------------+---------------------+
== CHECK_UP ==
..
{|
|
......
Welcome to the documentation of High Frequency Radars (CODAR and WERA)
=======================================================================
......@@ -14,10 +13,16 @@ The main documentation for the site is organized into a couple sections:
Postprocessing
----------------
* CODARprocessing
* WERAprocessing
* CurrentsCombination
* OGSL
Documentation about the steps of the analysis
.. toctree::
:maxdepth: 2
CODARprocessing
WERAprocessing
CurrentsCombination
OGSL
Experiments
......
......@@ -24,7 +24,7 @@
<script type="text/javascript" src="_static/underscore.js"></script>
<script type="text/javascript" src="_static/doctools.js"></script>
<link rel="top" title="documentation_HFR_analysis 0.0.1 documentation" href="#" />
<link rel="next" title="Experiment on May 15, 2013" href="20130515.html" />
<link rel="next" title="CODAR radial currents processing" href="CODARprocessing.html" />
</head>
<body>
<div class="related">
......@@ -34,7 +34,7 @@
<a href="genindex.html" title="General Index"
accesskey="I">index</a></li>
<li class="right" >
<a href="20130515.html" title="Experiment on May 15, 2013"
<a href="CODARprocessing.html" title="CODAR radial currents processing"
accesskey="N">next</a> |</li>
<li><a href="#">documentation_HFR_analysis 0.0.1 documentation</a> &raquo;</li>
</ul>
......@@ -52,13 +52,17 @@
<p>The main documentation for the site is organized into a couple sections:</p>
<div class="section" id="postprocessing">
<h2>Postprocessing<a class="headerlink" href="#postprocessing" title="Permalink to this headline"></a></h2>
<ul class="simple">
<li>CODARprocessing</li>
<li>WERAprocessing</li>
<li>CurrentsCombination</li>
<li>OGSL</li>
<p>Documentation about the steps of the analysis</p>
<div class="toctree-wrapper compound">
<ul>
<li class="toctree-l1"><a class="reference internal" href="CODARprocessing.html">CODAR radial currents processing</a></li>
<li class="toctree-l1"><a class="reference internal" href="CODARprocessing.html#check-up">CHECK-UP</a></li>
<li class="toctree-l1"><a class="reference internal" href="WERAprocessing.html">WERA POST=PROCESSING</a></li>
<li class="toctree-l1"><a class="reference internal" href="CurrentsCombination.html">Current combination</a></li>
<li class="toctree-l1"><a class="reference internal" href="OGSL.html">OGSL quasi-realtime data feed</a></li>
</ul>
</div>
</div>
<div class="section" id="experiments">
<h2>Experiments<a class="headerlink" href="#experiments" title="Permalink to this headline"></a></h2>
<p>Below are the field experiments used to conduct comparisons between HFR and buoys/ADCP data/ model outputs.</p>
......@@ -89,8 +93,8 @@
</ul>
<h4>Next topic</h4>
<p class="topless"><a href="20130515.html"
title="next chapter">Experiment on May 15, 2013</a></p>
<p class="topless"><a href="CODARprocessing.html"
title="next chapter">CODAR radial currents processing</a></p>
<h3>This Page</h3>
<ul class="this-page-menu">
<li><a href="_sources/index.txt"
......@@ -120,7 +124,7 @@
<a href="genindex.html" title="General Index"
>index</a></li>
<li class="right" >
<a href="20130515.html" title="Experiment on May 15, 2013"
<a href="CODARprocessing.html" title="CODAR radial currents processing"
>next</a> |</li>
<li><a href="#">documentation_HFR_analysis 0.0.1 documentation</a> &raquo;</li>
</ul>
......
Search.setIndex({envversion:42,terms:{all:[10,2],identifi:5,spectratoprocess:10,move:[10,2],lst:5,do_process_sort_pol:5,marion:10,estuari:6,follow:[10,2],disk:10,find:[0,5],paramet:10,categori:[],onli:10,postprocess:[],locat:2,hfr_lsle_20150817t170000z:2,radial2uv:10,css_:10,pab:2,dispers:0,instrument:6,theme:[],matlab:2,radialconfig:10,everi:[5,2],lsle:[8,5,6],main:0,local:10,approxim:2,patt_pap1_2014_01_14_1154_nosmooth:10,unzip:2,march:10,variou:6,get:10,convert:[5,2],between:0,dai:[10,5],projet:2,grid:2,ssh:[5,2],adcp:0,radiallst2uv:5,tri:2,measur:10,csv:2,ascii2mat:2,hour:[5,2],organ:0,hfrdata:2,hfrmat:2,should:5,spectraprocess:10,server:[10,2],measpattern:10,diagram:10,yyyyjjj:5,each:[5,2,6],output:[0,5],reprocess_ogsl_hfr_treat:2,page:0,xlp:10,www:2,transform:10,codarprocess:0,ftp_transfer:5,direct:10,crontab:2,past:10,sure:10,sampl:6,result:[5,2],year:5,download:[5,2],home:[5,2],"55min":2,webserv:2,index:[],what:[10,2],total:2,miss:10,section:0,per:5,research:[],content:10,hourli:2,conduct:[0,8,2],run:[10,2],codar2:10,codar1:10,advanc:10,spot:6,gener:[5,2],radial:[5,2,10],htdoc:2,water:6,lawrenc:6,than:5,extent:5,found:5,org:5,come:10,rfi:5,care:10,comparison:0,search:[],last:2,ogsl_hfr_treat:2,column:6,codar_wera_ogsl:2,forecast:0,idealpattern:10,filter:10,april:5,srv:2,desktop:10,chang:10,origin:10,routin:2,via:2,pap1_css_:10,onc:10,modul:[],deploi:6,automat:10,system:[5,2],header:10,weather:[],drogu:6,txt:10,open:10,stf:[10,2],simpler:5,avail:2,from:[5,2,10],log:2,coupl:0,script:[5,2],transfer:10,loggin:10,currentshfrwithaverageexport:2,add:10,been:10,websit:2,start:10,much:5,music:10,interest:10,spectraseri:10,stage:2,rad2tot:2,store:10,more:0,sort:5,download_wera_rt:2,setup:10,shell:[5,2],travail:2,saint:6,delet:10,copi:[10,2],about:0,back:10,flag:10,part:0,modifi:10,togeth:2,line:10,folder:[10,5],had:6,info:0,codardata:10,save:10,retriev:10,sometim:10,currentscombin:0,provid:2,remov:10,work:[0,2],smooth:10,displai:2,project:0,below:0,can:10,were:6,crad_pol_lst:5,"export":2,minut:2,radialconfigs_pap1_20130201_bapm_music402002_nosmooth:10,observ:2,loop:10,hfr:[0,2],comput:2,file:[5,2,10],creat:10,julian:5,hfr_data_process:2,site:[0,5,2,10],subfold:5,heur:5,ruv2mat:2,archiv:[10,2],"20d":10,have:10,field:0,need:10,ismer:0,doe:[10,2],ascii:2,check:10,download_codar_rt:2,fill:10,uncheck:10,"_ascii":5,date:5,thei:5,antenna:10,min:2,check_up:10,pap1:10,make:10,format:2,dyndn:5,also:10,ideal:10,other:0,uqar:[0,10],verifi:5,you:[0,10],trash:10,config:10,pao:[5,2],pap:[10,2],ruv:[10,2],relat:0,http:2,mat:[5,2,10],after:10,drift:0,rsync:5,seasond:10,marin:0,befor:10,meopar:0,attent:10,improv:0,phase:10,radialconfigs_pap1_20130201_bapm_music402002_20dsmooth:10,data:[],model:0,averag:2,lower:6,appropri:10,kept:2,hfr_process:2,directori:2,spectra:10,season:[],buoi:[0,6],depth:6,exampl:[10,5],matfil:2,thi:[0,2,6],cs4:10,everyth:10,bandet:10,order:6,weraprocess:0},objtypes:{},objnames:{},filenames:["index","20130826","CurrentsCombination","20130830","20130515","WERAprocessing","20140506","OGSL","experiments","postprocessing","CODARprocessing"],titles:["Welcome to the documentation of High Frequency Radars (CODAR and WERA)","Experiment on August 26, 2013","Current combination","Experiment on August 20, 2013","Experiment on May 15, 2013","WERA POST=PROCESSING","Experiment on May 06, 2014","OGSL quasi-realtime data feed","&lt;no title&gt;","CODAR processing","CODAR post-processing"],objects:{},titleterms:{feed:[9,7],process:[10,5,9],indic:[],high:0,radar:0,tabl:[],mai:[4,6],welcom:0,current:2,quasi:7,postprocess:0,document:0,codar:[0,9,10],analysi:[],august:[1,3],ogsl:[9,7],documentation_hfr_analysi:[],post:[10,5],data:[9,7],experi:[0,1,4,6,3],frequenc:0,list:[],wera:[0,5,9],combin:2,realtim:7}})
\ No newline at end of file
Search.setIndex({envversion:42,terms:{all:[10,2],identifi:5,spectratoprocess:10,from:[5,2,10],move:[10,2],remov:10,lst:5,via:2,marion:10,estuari:6,follow:[10,2],disk:10,find:[0,5],paramet:10,categori:[],onli:10,postprocess:[],locat:2,hfr_lsle_20150817t170000z:2,copi:[10,2],css_:10,ideal:10,dispers:0,about:0,instrument:6,theme:[],matlab:2,radialconfig:10,lsle:[8,5,6],main:0,local:10,modul:[],info:0,unzip:2,march:10,variou:6,get:10,than:5,between:0,dai:[10,5],projet:2,volum:10,ssh:[5,2],adcp:0,radiallst2uv:5,tri:2,measur:10,trash:10,ascii2mat:2,currentscombin:[],organ:0,hfrdata:2,hfrmat:2,should:5,spectraprocess:10,server:[10,2],measpattern:10,phase:10,min:2,each:[5,2,6],output:[0,5],reprocess_ogsl_hfr_treat:2,page:0,xlp:10,www:2,marin:0,codarprocess:[],ftp_transfer:5,direct:10,crontab:2,past:10,sampl:6,result:[5,2],year:5,download:[5,2],home:[5,2],"55min":2,improv:0,mat:[5,2,10],index:[],what:[10,2],txt:10,open:10,section:0,per:5,research:[],cell:10,hourli:2,conduct:[0,8,2],content:10,run:[10,2],codar2:10,codar1:10,advanc:10,drift:0,gener:[5,2],radial:[5,2],water:6,step:0,add:10,extent:5,found:5,org:5,come:10,rfi:5,care:10,comparison:0,convert:[5,2],last:2,befor:10,row:10,codar_wera_ogsl:2,forecast:0,idealpattern:10,filter:10,april:5,srv:2,desktop:10,chang:10,origin:10,routin:2,do_process_sort_pol:5,pap1_css_:10,buoi:[0,6],onc:10,approxim:2,automat:10,system:[5,2],order:6,header:10,weather:[],drogu:6,total:2,miss:10,stage:2,spectra:10,websit:2,span:10,log:2,coupl:0,script:[5,2],pap1:10,transfer:10,loggin:10,currentshfrwithaverageexport:2,transform:10,been:10,avail:2,start:10,much:5,music:10,interest:10,codardata:10,spectraseri:10,simpler:5,rad2tot:2,store:10,more:0,sort:5,download_wera_rt:2,shell:[5,2],travail:2,saint:6,delet:10,relat:0,search:[],back:10,flag:10,part:0,modifi:10,togeth:2,line:10,cs4:10,folder:[10,5],had:6,patt_pap1_2014_01_14_1154_nosmooth:10,also:10,stf:[10,2],save:10,retriev:10,sometim:10,hour:[5,2],provid:2,setup:10,work:[0,2],smooth:10,displai:2,project:0,column:[10,6],below:0,can:10,were:6,crad_pol_lst:5,"export":2,minut:2,radialconfigs_pap1_20130201_bapm_music402002_nosmooth:10,observ:2,loop:10,hfr:[0,2],comput:2,have:10,creat:10,julian:5,site:[0,5,2,10],subfold:5,heur:5,ruv2mat:2,archiv:[10,2],"20d":10,file:[5,2,10],ismer:0,need:10,everi:[5,2],doe:[10,2],lawrenc:6,check:[],download_codar_rt:2,fill:10,uncheck:10,thei:5,antenna:10,hfr_data_process:2,check_up:[],ascii:2,make:10,format:2,depth:6,dyndn:5,field:0,pab:2,other:0,option:10,uqar:[0,10],verifi:5,you:[0,10],csv:2,config:10,pao:[5,2],pap:[10,2],ruv:[10,2],sure:10,http:2,webserv:2,after:10,spot:6,rsync:5,seasond:10,diagram:10,ogsl_hfr_treat:2,meopar:0,weraprocess:[],attent:10,deploi:6,date:5,radialconfigs_pap1_20130201_bapm_music402002_20dsmooth:10,contain:10,data:[],everyth:10,averag:2,lower:6,appropri:10,kept:2,hfr_process:2,directori:2,htdoc:2,season:[],element:10,"_ascii":5,exampl:[10,5],matfil:2,thi:[0,2,6],grid:2,model:0,bodi:10,bandet:10,radial2uv:10,yyyyjjj:5},objtypes:{},objnames:{},filenames:["index","20130826","CurrentsCombination","20130830","20130515","WERAprocessing","20140506","OGSL","experiments","postprocessing","CODARprocessing"],titles:["Welcome to the documentation of High Frequency Radars (CODAR and WERA)","Experiment on August 26, 2013","Current combination","Experiment on August 20, 2013","Experiment on May 15, 2013","WERA POST=PROCESSING","Experiment on May 06, 2014","OGSL quasi-realtime data feed","&lt;no title&gt;","CODAR processing","CODAR radial currents processing"],objects:{},titleterms:{feed:[9,7],process:[10,5,9],indic:[],high:0,radar:0,tabl:[],check:10,mai:[4,6],welcom:0,current:[10,2],quasi:7,postprocess:0,experi:[0,1,4,6,3],codar:[0,9,10],analysi:[],august:[1,3],realtim:7,ogsl:[9,7],documentation_hfr_analysi:[],post:5,data:[9,7],document:0,frequenc:0,list:[],wera:[0,5,9],combin:2,radial:10}})
\ No newline at end of file
You have to loggin to the CODAR server at UQAR.
CODAR radial currents processing
==================================
You have to loggin to the CODAR server at UQAR.
Then follow the directions:
1. Check processed data
== Check processed data ==
Go to
'''CodarData/Codar/SeaSonde/Data/Spectra/SpectraProcessed'''
* check that all files have been processed
* If ok, remove all file (move to trash)
Go to **/Volumes/CodarData/Codar/SeaSonde/Data/Spectra/SpectraProcessed/**
- check that all files have been processed
- If ok, remove all file (move to trash)
== RadialConfig ==
Go to
2. RadialConfig
'''CodarData/Codar/SeaSonde/Configs/RadialConfigs'''
Go to **/Volumes/CodarData/Codar/SeaSonde/Configs/RadialConfigs/**
* Delete everything
- Delete everything
Go to (for example)
'''CodarData/Codar/SeaSonde/Configs/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_nosmooth'''
Go to (for example) **/Volumes/CodarData/Codar/SeaSonde/Configs/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_nosmooth/**
* Copy the content of the folder into
- Copy the content of the folder into **/Volumes/CodarData/Codar/SeaSonde/Configs/RadialConfigs/**
'''CodarData/Codar/SeaSonde/Configs/RadialConfigs'''
CODAR post-processing
=====================
== Antenna diagrams for processing ==
3. Antenna diagrams for processing
Go to
Go to **/Volumes/CodarData/Codar/SeaSonde/Data/Loops/PATT_PAP1_2014_01_14_1154_NoSmooth.xlp**
'''CodarData/Codar/SeaSonde/Data/Loops/ PATT_PAP1_2014_01_14_1154_NoSmooth.xlp'''
- Copy MeasPattern.txt and Phases.txt
Copy MeasPattern.txt and Phases.txt
- Paste in **/Volumes/CodarData/Codar/SeaSonde/Configs/RadialConfigs/**
Paste in
'''CodarData/Codar/SeaSonde/Configs/RadialConfigs'''
- Open Header.txt and change line 19 if needed
Open Header.txt and change line 19 if needed
- save (MUSIC parameters 40 20 2 or 80 40 1)
save. (MUSIC parameters 40 20 2 or 80 40 1)
**ADD-ON Analysis on March 14, 2014**
=='''ADD-ON Analysis on March 14, 2014'''==
+ Go to **/Volumes/CodarData/Codar/SeaSonde/Configs/RadialConfigs/**
Go to
+ Run “Seasonde Radial Site Setup”.
'''CodarData/Codar/SeaSonde/Configs/RadialConfigs'''
In “Advanced”, uncheck “filtered and filled” and check “filtered” only.
Run “Seasonde Radial Site Setup”.
In “Advanced”, uncheck “filtered and filled” and check “filtered” only.
Save.
+ Save.
Copy the content of the folder RadialConfigs back to the original folder, for example if what is in the “/RadialConfigs” folder comes from “/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_20Dsmooth”, after running the “Seasonde Radial Site Setup”, copy the content of “/RadialConfigs” back to “/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_20Dsmooth”.
4. Spectra
== Spectra ==
Go get spectra on disks (CODAR1 or CODAR2) (on desktop)
Go to (for example)
+ Go get spectra on disks (CODAR1 or CODAR2) (on desktop)
'''Codar2/PAP1/Archives/Spectra/'''
+ Go to (for example) **/Volumes/Codar2/PAP1/Archives/Spectra/**
Copy the day(s) we are interested in
+ Copy the day(s) we are interested in
(Attention: copy the CSS_....cs4 files in PAP1_CSS_... folder!!)
and paste in **/Volumes/CodarData/Codar/SeaSonde/Data/Spectra/SpectraToProcess/**
(Attention: copy the CSS_....cs4 files in PAP1_CSS_... folder!!)
and paste in
==> Can also store spectra in **/Volumes/CodarData/Codar/SeaSonde/Data/Spectra/SpectraSeries**
before copy/paste in **SpectraToProcess**
'''CodarData/Codar/SeaSonde/Data/Spectra/SpectraToProcess'''
==> Can also store spectra in
CodarData/Codar/SeaSonde/Data/Spectra/SpectraSeries
Before copy/paste in SpectraToProcess
Once the spectra are in SpectraToProcess, the analysis starts automatically!
+ Once the spectra are in SpectraToProcess, the analysis starts automatically!
ATTENTION: make sure all the files are copied in “SpectraToProcess” sometimes copy-paste does miss files….
== Retrieve processed data ==
5. Retrieve processed data
Go to
'''CodarData/Codar/SeaSonde/Data/Radials/'''
+ Go to **/Volumes/CodarData/Codar/SeaSonde/Data/Radials/**
Processed data are in “Filtered”, “IdealPattern” and “MeasPattern” folders.
Save data in appropriate folders (to be created if needs be)
+ Save data in appropriate folders (to be created if needs be)
MUSIC 40-20-2
*no smoothing
*measured no filtered
*ideal no filtered
*measured filtered
*ideal filtered
* no smoothing
* measured no filtered
* ideal no filtered
* measured filtered
* ideal filtered
MUSIC 80-40-1
*no smoothing
*measured no filtered
*ideal no filtered
*measured filtered
*ideal filtered
* no smoothing
* measured no filtered
* ideal no filtered
* measured filtered
* ideal filtered
MUSIC 40-20-2
*20D smoothing
*measured no filtered
*measured filtered
* 20D smoothing
* measured no filtered
* measured filtered
MUSIC 80-40-1
*20D smoothing
*measured no filtered
*measured filtered
* 20D smoothing
* measured no filtered
* measured filtered
6. Transfer data to local disk
== Transfer data to local disk ==
7. Transform .ruv to .mat
Using radial2uv.m. Be careful to the flag f.
== Transform .ruv to .mat ==
* f=0 for not filtered data;
* f=1 for filtered data
Using radial2uv.m
Be careful to the flag f.
*f=0 for not filtered data;
*f=1 for filtered data
CHECK-UP
==========
+------------------------+------------+----------+----------+
| Header row, column 1 | Header 2 | Header 3 | Header 4 |
| (header rows optional) | | | |
+========================+============+==========+==========+
| body row 1, column 1 | column 2 | column 3 | column 4 |
+------------------------+------------+----------+----------+
| body row 2 | Cells may span columns. |
+------------------------+------------+---------------------+
| body row 3 | Cells may | - Table cells |
+------------------------+ span rows. | - contain |
| body row 4 | | - body elements. |
+------------------------+------------+---------------------+
== CHECK_UP ==
..
{|
|
......
Welcome to the documentation of High Frequency Radars (CODAR and WERA)
=======================================================================
......@@ -14,10 +13,16 @@ The main documentation for the site is organized into a couple sections:
Postprocessing
----------------
* CODARprocessing
* WERAprocessing
* CurrentsCombination
* OGSL
Documentation about the steps of the analysis
.. toctree::
:maxdepth: 2
CODARprocessing
WERAprocessing
CurrentsCombination
OGSL
Experiments
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment