Commit bcbba8cb authored by Marion Bandet's avatar Marion Bandet

update

parent 27ca2924
This diff is collapsed.
You have to loggin to the CODAR server at UQAR.
CODAR radial currents processing
==================================
You have to loggin to the CODAR server at UQAR.
Then follow the directions:
1. Check processed data
== Check processed data ==
Go to
'''CodarData/Codar/SeaSonde/Data/Spectra/SpectraProcessed'''
* check that all files have been processed
* If ok, remove all file (move to trash)
Go to **/Volumes/CodarData/Codar/SeaSonde/Data/Spectra/SpectraProcessed/**
- check that all files have been processed
- If ok, remove all file (move to trash)
== RadialConfig ==
Go to
2. RadialConfig
'''CodarData/Codar/SeaSonde/Configs/RadialConfigs'''
Go to **/Volumes/CodarData/Codar/SeaSonde/Configs/RadialConfigs/**
* Delete everything
- Delete everything
Go to (for example)
'''CodarData/Codar/SeaSonde/Configs/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_nosmooth'''
Go to (for example) **/Volumes/CodarData/Codar/SeaSonde/Configs/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_nosmooth/**
* Copy the content of the folder into
- Copy the content of the folder into **/Volumes/CodarData/Codar/SeaSonde/Configs/RadialConfigs/**
'''CodarData/Codar/SeaSonde/Configs/RadialConfigs'''
CODAR post-processing
=====================
== Antenna diagrams for processing ==
3. Antenna diagrams for processing
Go to
Go to **/Volumes/CodarData/Codar/SeaSonde/Data/Loops/PATT_PAP1_2014_01_14_1154_NoSmooth.xlp**
'''CodarData/Codar/SeaSonde/Data/Loops/ PATT_PAP1_2014_01_14_1154_NoSmooth.xlp'''
- Copy MeasPattern.txt and Phases.txt
Copy MeasPattern.txt and Phases.txt
- Paste in **/Volumes/CodarData/Codar/SeaSonde/Configs/RadialConfigs/**
Paste in
'''CodarData/Codar/SeaSonde/Configs/RadialConfigs'''
- Open Header.txt and change line 19 if needed
Open Header.txt and change line 19 if needed
- save (MUSIC parameters 40 20 2 or 80 40 1)
save. (MUSIC parameters 40 20 2 or 80 40 1)
**ADD-ON Analysis on March 14, 2014**
=='''ADD-ON Analysis on March 14, 2014'''==
+ Go to **/Volumes/CodarData/Codar/SeaSonde/Configs/RadialConfigs/**
Go to
+ Run “Seasonde Radial Site Setup”.
'''CodarData/Codar/SeaSonde/Configs/RadialConfigs'''
In “Advanced”, uncheck “filtered and filled” and check “filtered” only.
Run “Seasonde Radial Site Setup”.
In “Advanced”, uncheck “filtered and filled” and check “filtered” only.
Save.
+ Save.
Copy the content of the folder RadialConfigs back to the original folder, for example if what is in the “/RadialConfigs” folder comes from “/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_20Dsmooth”, after running the “Seasonde Radial Site Setup”, copy the content of “/RadialConfigs” back to “/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_20Dsmooth”.
4. Spectra
== Spectra ==
Go get spectra on disks (CODAR1 or CODAR2) (on desktop)
Go to (for example)
'''Codar2/PAP1/Archives/Spectra/'''
+ Go get spectra on disks (CODAR1 or CODAR2) (on desktop)
Copy the day(s) we are interested in
+ Go to (for example) **/Volumes/Codar2/PAP1/Archives/Spectra/**
(Attention: copy the CSS_....cs4 files in PAP1_CSS_... folder!!)
and paste in
+ Copy the day(s) we are interested in
(Attention: copy the CSS_....cs4 files in PAP1_CSS_... folder!!)
and paste in **/Volumes/CodarData/Codar/SeaSonde/Data/Spectra/SpectraToProcess/**
'''CodarData/Codar/SeaSonde/Data/Spectra/SpectraToProcess'''
==> Can also store spectra in **/Volumes/CodarData/Codar/SeaSonde/Data/Spectra/SpectraSeries**
before copy/paste in **SpectraToProcess**
==> Can also store spectra in
CodarData/Codar/SeaSonde/Data/Spectra/SpectraSeries
Before copy/paste in SpectraToProcess
Once the spectra are in SpectraToProcess, the analysis starts automatically!
+ Once the spectra are in SpectraToProcess, the analysis starts automatically!
ATTENTION: make sure all the files are copied in “SpectraToProcess” sometimes copy-paste does miss files….
== Retrieve processed data ==
Go to
5. Retrieve processed data
'''CodarData/Codar/SeaSonde/Data/Radials/'''
+ Go to **/Volumes/CodarData/Codar/SeaSonde/Data/Radials/**
Processed data are in “Filtered”, “IdealPattern” and “MeasPattern” folders.
Save data in appropriate folders (to be created if needs be)
+ Save data in appropriate folders (to be created if needs be)
MUSIC 40-20-2
*no smoothing
*measured no filtered
*ideal no filtered
*measured filtered
*ideal filtered
* no smoothing
* measured no filtered
* ideal no filtered
* measured filtered
* ideal filtered
MUSIC 80-40-1
*no smoothing
*measured no filtered
*ideal no filtered
*measured filtered
*ideal filtered
* no smoothing
* measured no filtered
* ideal no filtered
* measured filtered
* ideal filtered
MUSIC 40-20-2
*20D smoothing
*measured no filtered
*measured filtered
* 20D smoothing
* measured no filtered
* measured filtered
MUSIC 80-40-1
*20D smoothing
*measured no filtered
*measured filtered
* 20D smoothing
* measured no filtered
* measured filtered
6. Transfer data to local disk
== Transfer data to local disk ==
7. Transform .ruv to .mat
Using radial2uv.m. Be careful to the flag f.
* f=0 for not filtered data;
* f=1 for filtered data
== Transform .ruv to .mat ==
Using radial2uv.m
Be careful to the flag f.
*f=0 for not filtered data;
*f=1 for filtered data
CHECK-UP
==========
+------------------------+------------+----------+----------+
| Header row, column 1 | Header 2 | Header 3 | Header 4 |
| (header rows optional) | | | |
+========================+============+==========+==========+
| body row 1, column 1 | column 2 | column 3 | column 4 |
+------------------------+------------+----------+----------+
| body row 2 | Cells may span columns. |
+------------------------+------------+---------------------+
| body row 3 | Cells may | - Table cells |
+------------------------+ span rows. | - contain |
| body row 4 | | - body elements. |
+------------------------+------------+---------------------+
..
== CHECK_UP ==
{|
|
|
......
Welcome to the documentation of High Frequency Radars (CODAR and WERA)
=======================================================================
......@@ -13,12 +12,18 @@ The main documentation for the site is organized into a couple sections:
Postprocessing
----------------
Documentation about the steps of the analysis
.. toctree::
:maxdepth: 2
CODARprocessing
WERAprocessing
CurrentsCombination
OGSL
* CODARprocessing
* WERAprocessing
* CurrentsCombination
* OGSL
Experiments
-------------
......
......@@ -24,7 +24,7 @@
<script type="text/javascript" src="_static/underscore.js"></script>
<script type="text/javascript" src="_static/doctools.js"></script>
<link rel="top" title="documentation_HFR_analysis 0.0.1 documentation" href="#" />
<link rel="next" title="Experiment on May 15, 2013" href="20130515.html" />
<link rel="next" title="CODAR radial currents processing" href="CODARprocessing.html" />
</head>
<body>
<div class="related">
......@@ -34,7 +34,7 @@
<a href="genindex.html" title="General Index"
accesskey="I">index</a></li>
<li class="right" >
<a href="20130515.html" title="Experiment on May 15, 2013"
<a href="CODARprocessing.html" title="CODAR radial currents processing"
accesskey="N">next</a> |</li>
<li><a href="#">documentation_HFR_analysis 0.0.1 documentation</a> &raquo;</li>
</ul>
......@@ -52,13 +52,17 @@
<p>The main documentation for the site is organized into a couple sections:</p>
<div class="section" id="postprocessing">
<h2>Postprocessing<a class="headerlink" href="#postprocessing" title="Permalink to this headline"></a></h2>
<ul class="simple">
<li>CODARprocessing</li>
<li>WERAprocessing</li>
<li>CurrentsCombination</li>
<li>OGSL</li>
<p>Documentation about the steps of the analysis</p>
<div class="toctree-wrapper compound">
<ul>
<li class="toctree-l1"><a class="reference internal" href="CODARprocessing.html">CODAR radial currents processing</a></li>
<li class="toctree-l1"><a class="reference internal" href="CODARprocessing.html#check-up">CHECK-UP</a></li>
<li class="toctree-l1"><a class="reference internal" href="WERAprocessing.html">WERA POST=PROCESSING</a></li>
<li class="toctree-l1"><a class="reference internal" href="CurrentsCombination.html">Current combination</a></li>
<li class="toctree-l1"><a class="reference internal" href="OGSL.html">OGSL quasi-realtime data feed</a></li>
</ul>
</div>
</div>
<div class="section" id="experiments">
<h2>Experiments<a class="headerlink" href="#experiments" title="Permalink to this headline"></a></h2>
<p>Below are the field experiments used to conduct comparisons between HFR and buoys/ADCP data/ model outputs.</p>
......@@ -89,8 +93,8 @@
</ul>
<h4>Next topic</h4>
<p class="topless"><a href="20130515.html"
title="next chapter">Experiment on May 15, 2013</a></p>
<p class="topless"><a href="CODARprocessing.html"
title="next chapter">CODAR radial currents processing</a></p>
<h3>This Page</h3>
<ul class="this-page-menu">
<li><a href="_sources/index.txt"
......@@ -120,7 +124,7 @@
<a href="genindex.html" title="General Index"
>index</a></li>
<li class="right" >
<a href="20130515.html" title="Experiment on May 15, 2013"
<a href="CODARprocessing.html" title="CODAR radial currents processing"
>next</a> |</li>
<li><a href="#">documentation_HFR_analysis 0.0.1 documentation</a> &raquo;</li>
</ul>
......
Search.setIndex({envversion:42,terms:{all:[10,2],identifi:5,spectratoprocess:10,move:[10,2],lst:5,do_process_sort_pol:5,marion:10,estuari:6,follow:[10,2],disk:10,find:[0,5],paramet:10,categori:[],onli:10,postprocess:[],locat:2,hfr_lsle_20150817t170000z:2,radial2uv:10,css_:10,pab:2,dispers:0,instrument:6,theme:[],matlab:2,radialconfig:10,everi:[5,2],lsle:[8,5,6],main:0,local:10,approxim:2,patt_pap1_2014_01_14_1154_nosmooth:10,unzip:2,march:10,variou:6,get:10,convert:[5,2],between:0,dai:[10,5],projet:2,grid:2,ssh:[5,2],adcp:0,radiallst2uv:5,tri:2,measur:10,csv:2,ascii2mat:2,hour:[5,2],organ:0,hfrdata:2,hfrmat:2,should:5,spectraprocess:10,server:[10,2],measpattern:10,diagram:10,yyyyjjj:5,each:[5,2,6],output:[0,5],reprocess_ogsl_hfr_treat:2,page:0,xlp:10,www:2,transform:10,codarprocess:0,ftp_transfer:5,direct:10,crontab:2,past:10,sure:10,sampl:6,result:[5,2],year:5,download:[5,2],home:[5,2],"55min":2,webserv:2,index:[],what:[10,2],total:2,miss:10,section:0,per:5,research:[],content:10,hourli:2,conduct:[0,8,2],run:[10,2],codar2:10,codar1:10,advanc:10,spot:6,gener:[5,2],radial:[5,2,10],htdoc:2,water:6,lawrenc:6,than:5,extent:5,found:5,org:5,come:10,rfi:5,care:10,comparison:0,search:[],last:2,ogsl_hfr_treat:2,column:6,codar_wera_ogsl:2,forecast:0,idealpattern:10,filter:10,april:5,srv:2,desktop:10,chang:10,origin:10,routin:2,via:2,pap1_css_:10,onc:10,modul:[],deploi:6,automat:10,system:[5,2],header:10,weather:[],drogu:6,txt:10,open:10,stf:[10,2],simpler:5,avail:2,from:[5,2,10],log:2,coupl:0,script:[5,2],transfer:10,loggin:10,currentshfrwithaverageexport:2,add:10,been:10,websit:2,start:10,much:5,music:10,interest:10,spectraseri:10,stage:2,rad2tot:2,store:10,more:0,sort:5,download_wera_rt:2,setup:10,shell:[5,2],travail:2,saint:6,delet:10,copi:[10,2],about:0,back:10,flag:10,part:0,modifi:10,togeth:2,line:10,folder:[10,5],had:6,info:0,codardata:10,save:10,retriev:10,sometim:10,currentscombin:0,provid:2,remov:10,work:[0,2],smooth:10,displai:2,project:0,below:0,can:10,were:6,crad_pol_lst:5,"export":2,minut:2,radialconfigs_pap1_20130201_bapm_music402002_nosmooth:10,observ:2,loop:10,hfr:[0,2],comput:2,file:[5,2,10],creat:10,julian:5,hfr_data_process:2,site:[0,5,2,10],subfold:5,heur:5,ruv2mat:2,archiv:[10,2],"20d":10,have:10,field:0,need:10,ismer:0,doe:[10,2],ascii:2,check:10,download_codar_rt:2,fill:10,uncheck:10,"_ascii":5,date:5,thei:5,antenna:10,min:2,check_up:10,pap1:10,make:10,format:2,dyndn:5,also:10,ideal:10,other:0,uqar:[0,10],verifi:5,you:[0,10],trash:10,config:10,pao:[5,2],pap:[10,2],ruv:[10,2],relat:0,http:2,mat:[5,2,10],after:10,drift:0,rsync:5,seasond:10,marin:0,befor:10,meopar:0,attent:10,improv:0,phase:10,radialconfigs_pap1_20130201_bapm_music402002_20dsmooth:10,data:[],model:0,averag:2,lower:6,appropri:10,kept:2,hfr_process:2,directori:2,spectra:10,season:[],buoi:[0,6],depth:6,exampl:[10,5],matfil:2,thi:[0,2,6],cs4:10,everyth:10,bandet:10,order:6,weraprocess:0},objtypes:{},objnames:{},filenames:["index","20130826","CurrentsCombination","20130830","20130515","WERAprocessing","20140506","OGSL","experiments","postprocessing","CODARprocessing"],titles:["Welcome to the documentation of High Frequency Radars (CODAR and WERA)","Experiment on August 26, 2013","Current combination","Experiment on August 20, 2013","Experiment on May 15, 2013","WERA POST=PROCESSING","Experiment on May 06, 2014","OGSL quasi-realtime data feed","&lt;no title&gt;","CODAR processing","CODAR post-processing"],objects:{},titleterms:{feed:[9,7],process:[10,5,9],indic:[],high:0,radar:0,tabl:[],mai:[4,6],welcom:0,current:2,quasi:7,postprocess:0,document:0,codar:[0,9,10],analysi:[],august:[1,3],ogsl:[9,7],documentation_hfr_analysi:[],post:[10,5],data:[9,7],experi:[0,1,4,6,3],frequenc:0,list:[],wera:[0,5,9],combin:2,realtim:7}})
\ No newline at end of file
Search.setIndex({envversion:42,terms:{all:[10,2],identifi:5,spectratoprocess:10,from:[5,2,10],move:[10,2],remov:10,lst:5,via:2,marion:10,estuari:6,follow:[10,2],disk:10,find:[0,5],paramet:10,categori:[],onli:10,postprocess:[],locat:2,hfr_lsle_20150817t170000z:2,copi:[10,2],css_:10,ideal:10,dispers:0,about:0,instrument:6,theme:[],matlab:2,radialconfig:10,lsle:[8,5,6],main:0,local:10,modul:[],info:0,unzip:2,march:10,variou:6,get:10,than:5,between:0,dai:[10,5],projet:2,volum:10,ssh:[5,2],adcp:0,radiallst2uv:5,tri:2,measur:10,trash:10,ascii2mat:2,currentscombin:[],organ:0,hfrdata:2,hfrmat:2,should:5,spectraprocess:10,server:[10,2],measpattern:10,phase:10,min:2,each:[5,2,6],output:[0,5],reprocess_ogsl_hfr_treat:2,page:0,xlp:10,www:2,marin:0,codarprocess:[],ftp_transfer:5,direct:10,crontab:2,past:10,sampl:6,result:[5,2],year:5,download:[5,2],home:[5,2],"55min":2,improv:0,mat:[5,2,10],index:[],what:[10,2],txt:10,open:10,section:0,per:5,research:[],cell:10,hourli:2,conduct:[0,8,2],content:10,run:[10,2],codar2:10,codar1:10,advanc:10,drift:0,gener:[5,2],radial:[5,2],water:6,step:0,add:10,extent:5,found:5,org:5,come:10,rfi:5,care:10,comparison:0,convert:[5,2],last:2,befor:10,row:10,codar_wera_ogsl:2,forecast:0,idealpattern:10,filter:10,april:5,srv:2,desktop:10,chang:10,origin:10,routin:2,do_process_sort_pol:5,pap1_css_:10,buoi:[0,6],onc:10,approxim:2,automat:10,system:[5,2],order:6,header:10,weather:[],drogu:6,total:2,miss:10,stage:2,spectra:10,websit:2,span:10,log:2,coupl:0,script:[5,2],pap1:10,transfer:10,loggin:10,currentshfrwithaverageexport:2,transform:10,been:10,avail:2,start:10,much:5,music:10,interest:10,codardata:10,spectraseri:10,simpler:5,rad2tot:2,store:10,more:0,sort:5,download_wera_rt:2,shell:[5,2],travail:2,saint:6,delet:10,relat:0,search:[],back:10,flag:10,part:0,modifi:10,togeth:2,line:10,cs4:10,folder:[10,5],had:6,patt_pap1_2014_01_14_1154_nosmooth:10,also:10,stf:[10,2],save:10,retriev:10,sometim:10,hour:[5,2],provid:2,setup:10,work:[0,2],smooth:10,displai:2,project:0,column:[10,6],below:0,can:10,were:6,crad_pol_lst:5,"export":2,minut:2,radialconfigs_pap1_20130201_bapm_music402002_nosmooth:10,observ:2,loop:10,hfr:[0,2],comput:2,have:10,creat:10,julian:5,site:[0,5,2,10],subfold:5,heur:5,ruv2mat:2,archiv:[10,2],"20d":10,file:[5,2,10],ismer:0,need:10,everi:[5,2],doe:[10,2],lawrenc:6,check:[],download_codar_rt:2,fill:10,uncheck:10,thei:5,antenna:10,hfr_data_process:2,check_up:[],ascii:2,make:10,format:2,depth:6,dyndn:5,field:0,pab:2,other:0,option:10,uqar:[0,10],verifi:5,you:[0,10],csv:2,config:10,pao:[5,2],pap:[10,2],ruv:[10,2],sure:10,http:2,webserv:2,after:10,spot:6,rsync:5,seasond:10,diagram:10,ogsl_hfr_treat:2,meopar:0,weraprocess:[],attent:10,deploi:6,date:5,radialconfigs_pap1_20130201_bapm_music402002_20dsmooth:10,contain:10,data:[],everyth:10,averag:2,lower:6,appropri:10,kept:2,hfr_process:2,directori:2,htdoc:2,season:[],element:10,"_ascii":5,exampl:[10,5],matfil:2,thi:[0,2,6],grid:2,model:0,bodi:10,bandet:10,radial2uv:10,yyyyjjj:5},objtypes:{},objnames:{},filenames:["index","20130826","CurrentsCombination","20130830","20130515","WERAprocessing","20140506","OGSL","experiments","postprocessing","CODARprocessing"],titles:["Welcome to the documentation of High Frequency Radars (CODAR and WERA)","Experiment on August 26, 2013","Current combination","Experiment on August 20, 2013","Experiment on May 15, 2013","WERA POST=PROCESSING","Experiment on May 06, 2014","OGSL quasi-realtime data feed","&lt;no title&gt;","CODAR processing","CODAR radial currents processing"],objects:{},titleterms:{feed:[9,7],process:[10,5,9],indic:[],high:0,radar:0,tabl:[],check:10,mai:[4,6],welcom:0,current:[10,2],quasi:7,postprocess:0,experi:[0,1,4,6,3],codar:[0,9,10],analysi:[],august:[1,3],realtim:7,ogsl:[9,7],documentation_hfr_analysi:[],post:5,data:[9,7],document:0,frequenc:0,list:[],wera:[0,5,9],combin:2,radial:10}})
\ No newline at end of file
You have to loggin to the CODAR server at UQAR.
CODAR radial currents processing
==================================
You have to loggin to the CODAR server at UQAR.
Then follow the directions:
1. Check processed data
== Check processed data ==
Go to
'''CodarData/Codar/SeaSonde/Data/Spectra/SpectraProcessed'''
* check that all files have been processed
* If ok, remove all file (move to trash)
Go to **/Volumes/CodarData/Codar/SeaSonde/Data/Spectra/SpectraProcessed/**
- check that all files have been processed
- If ok, remove all file (move to trash)
== RadialConfig ==
Go to
2. RadialConfig
'''CodarData/Codar/SeaSonde/Configs/RadialConfigs'''
Go to **/Volumes/CodarData/Codar/SeaSonde/Configs/RadialConfigs/**
* Delete everything
- Delete everything
Go to (for example)
'''CodarData/Codar/SeaSonde/Configs/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_nosmooth'''
Go to (for example) **/Volumes/CodarData/Codar/SeaSonde/Configs/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_nosmooth/**
* Copy the content of the folder into
- Copy the content of the folder into **/Volumes/CodarData/Codar/SeaSonde/Configs/RadialConfigs/**
'''CodarData/Codar/SeaSonde/Configs/RadialConfigs'''
CODAR post-processing
=====================
== Antenna diagrams for processing ==
3. Antenna diagrams for processing
Go to
Go to **/Volumes/CodarData/Codar/SeaSonde/Data/Loops/PATT_PAP1_2014_01_14_1154_NoSmooth.xlp**
'''CodarData/Codar/SeaSonde/Data/Loops/ PATT_PAP1_2014_01_14_1154_NoSmooth.xlp'''
- Copy MeasPattern.txt and Phases.txt
Copy MeasPattern.txt and Phases.txt
- Paste in **/Volumes/CodarData/Codar/SeaSonde/Configs/RadialConfigs/**
Paste in
'''CodarData/Codar/SeaSonde/Configs/RadialConfigs'''
- Open Header.txt and change line 19 if needed
Open Header.txt and change line 19 if needed
- save (MUSIC parameters 40 20 2 or 80 40 1)
save. (MUSIC parameters 40 20 2 or 80 40 1)
**ADD-ON Analysis on March 14, 2014**
=='''ADD-ON Analysis on March 14, 2014'''==
+ Go to **/Volumes/CodarData/Codar/SeaSonde/Configs/RadialConfigs/**
Go to
+ Run “Seasonde Radial Site Setup”.
'''CodarData/Codar/SeaSonde/Configs/RadialConfigs'''
In “Advanced”, uncheck “filtered and filled” and check “filtered” only.
Run “Seasonde Radial Site Setup”.
In “Advanced”, uncheck “filtered and filled” and check “filtered” only.
Save.
+ Save.
Copy the content of the folder RadialConfigs back to the original folder, for example if what is in the “/RadialConfigs” folder comes from “/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_20Dsmooth”, after running the “Seasonde Radial Site Setup”, copy the content of “/RadialConfigs” back to “/RadialConfigs_PAP1_20130201_BAPM_MUSIC402002_20Dsmooth”.
4. Spectra
== Spectra ==
Go get spectra on disks (CODAR1 or CODAR2) (on desktop)
Go to (for example)
'''Codar2/PAP1/Archives/Spectra/'''
+ Go get spectra on disks (CODAR1 or CODAR2) (on desktop)
Copy the day(s) we are interested in
+ Go to (for example) **/Volumes/Codar2/PAP1/Archives/Spectra/**
(Attention: copy the CSS_....cs4 files in PAP1_CSS_... folder!!)
and paste in
+ Copy the day(s) we are interested in
(Attention: copy the CSS_....cs4 files in PAP1_CSS_... folder!!)
and paste in **/Volumes/CodarData/Codar/SeaSonde/Data/Spectra/SpectraToProcess/**
'''CodarData/Codar/SeaSonde/Data/Spectra/SpectraToProcess'''
==> Can also store spectra in **/Volumes/CodarData/Codar/SeaSonde/Data/Spectra/SpectraSeries**
before copy/paste in **SpectraToProcess**
==> Can also store spectra in
CodarData/Codar/SeaSonde/Data/Spectra/SpectraSeries
Before copy/paste in SpectraToProcess
Once the spectra are in SpectraToProcess, the analysis starts automatically!
+ Once the spectra are in SpectraToProcess, the analysis starts automatically!
ATTENTION: make sure all the files are copied in “SpectraToProcess” sometimes copy-paste does miss files….
== Retrieve processed data ==
Go to
5. Retrieve processed data
'''CodarData/Codar/SeaSonde/Data/Radials/'''
+ Go to **/Volumes/CodarData/Codar/SeaSonde/Data/Radials/**
Processed data are in “Filtered”, “IdealPattern” and “MeasPattern” folders.
Save data in appropriate folders (to be created if needs be)
+ Save data in appropriate folders (to be created if needs be)
MUSIC 40-20-2
*no smoothing
*measured no filtered
*ideal no filtered
*measured filtered
*ideal filtered
* no smoothing
* measured no filtered
* ideal no filtered
* measured filtered
* ideal filtered
MUSIC 80-40-1
*no smoothing
*measured no filtered
*ideal no filtered
*measured filtered
*ideal filtered
* no smoothing
* measured no filtered
* ideal no filtered
* measured filtered
* ideal filtered
MUSIC 40-20-2
*20D smoothing
*measured no filtered
*measured filtered
* 20D smoothing
* measured no filtered
* measured filtered
MUSIC 80-40-1
*20D smoothing
*measured no filtered
*measured filtered
* 20D smoothing
* measured no filtered
* measured filtered
6. Transfer data to local disk
== Transfer data to local disk ==
7. Transform .ruv to .mat
Using radial2uv.m. Be careful to the flag f.
* f=0 for not filtered data;
* f=1 for filtered data
== Transform .ruv to .mat ==
Using radial2uv.m
Be careful to the flag f.
*f=0 for not filtered data;
*f=1 for filtered data
CHECK-UP
==========
+------------------------+------------+----------+----------+
| Header row, column 1 | Header 2 | Header 3 | Header 4 |
| (header rows optional) | | | |
+========================+============+==========+==========+
| body row 1, column 1 | column 2 | column 3 | column 4 |
+------------------------+------------+----------+----------+
| body row 2 | Cells may span columns. |
+------------------------+------------+---------------------+
| body row 3 | Cells may | - Table cells |
+------------------------+ span rows. | - contain |
| body row 4 | | - body elements. |
+------------------------+------------+---------------------+
..
== CHECK_UP ==
{|
|
|
......
Welcome to the documentation of High Frequency Radars (CODAR and WERA)
=======================================================================
......@@ -13,12 +12,18 @@ The main documentation for the site is organized into a couple sections:
Postprocessing
----------------
Documentation about the steps of the analysis
.. toctree::
:maxdepth: 2
CODARprocessing
WERAprocessing
CurrentsCombination
OGSL
* CODARprocessing
* WERAprocessing
* CurrentsCombination
* OGSL
Experiments
-------------
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment